I got an Airport card for Meredith's G4 Powerbook yesterday. I'm already on a mini-wireless network, using an Airport Express Base Station (love, love, love). I needed to remove the base of the computer in order to install the card. Anyway, I flipped over her laptop to install the card and lo . . . eight tiny screws with a star shaped impression. I'd never seen that type of impression on a screw-head before. I tried to unscrew the base using a precision flathead screwdriver. That didn't work, and I was bending the screwdriver head. After several trips up and down stairs to retrieve and return tools to my toolbox, I realized that I needed help. I looked at the Apple solutions webpage and it said that I needed an Torx Screwdriver, Size 8. At this point, I hadn't run Jake (the dog) yet, so I suited him up and plopped him in the car. It was a beautiful sunny day . . . slightly warm. With the windows lowered, we hit Home Depot first. I looked up and down the tool aisle and found a set of Torx screwdrivers, but the smallest size they had was a Size 10. I asked for help and a guy named Raoul sidled up to me, wearing his orange Home Depot smock. Together we looked up and down the aisle for the illusive Torx 8. We looked at all manner of combo screwdriver packs, tool kits, drill bits, etc. Finally, he turned to me and said, "Man, we don't have it."
I was dejected and Jake was in the car panting. Jake and I then set off to a smaller hardware store called Hallak's. The minute I walked in, a young man at the cash register asked if he could help me. I asked him about the Torx 8 and immediately he said, "We don't carry it. Go to an automotive store."
So, I jumped back into the car with Jake and we drove to Checker Auto Parts. I went to the tool section and found a Torx set, but none of them were marked with sizes. A fellow at the front desk asked if he could help me. Together, we looked up and down the aisle for the Torx 8. He finally turned to me and said, "Have you tried Home Depot?"
I hopped in my car. Poor Jake was panting and tired. His eyes were droopy. I decided to go home. When we got home, Jake drank eagerly from his water dish as I went back upstairs to retrieve the toolbox. I pulled out a precision flat head screwdriver that I had previously used in a failed attempt. This time, I pushed down a bit harder, turned a bit slower, and watched the screws from the bottom of Meredith's laptop, lift from the case. The Airport card was installed successfully.
The moral of this story? You don't need a stinkin' Torx screwdriver for nuthin'.
1 day ago
4 comments:
You have a new dog?!!
Oops. Didn't work the first time. Anyway, Jake is Meredith's dog
Hey O... next time, ask a geek (or a woman married to one and sister to another)... go to a computer store. I'm sure they'll have a Torx. --Sue
Post a Comment